How to Clean Berkey Filters Super Clean Method

0

Having filtered clean water is great. You can feel better about what you’re putting into your body, for sure. But now it’s time to make sure you know how to clean berkey filters and the chambers. Otherwise, germs and other grossness will build up and negate the whole reason you bought the unit.

What You Will Need to Follow this Tutorial

  • Following this tutorial is easy, as long as you have the right items. Make sure that you have:
    Berkey Water Filter System
  • Berkey black filters
  • 3m Scotch Brite Pad

Here’s an all-in-one Berkey maintanance kit if you’re in need of more than just some pads. It contains:

  • 2 Black Berkey Washers
  • 2 Wing Nuts
  • 2 Poly Blocking Plugs
  • 1 each of:
    • Replacement Spigot
    • Knob(with screw) for Lid
    • Scotch Brite Pad

If you are unable to get Berkey black filters, then you can use Berkey white ceramic filters. While these are both great water filters, the black filters do a better job at removing more chemicals and filtering out viruses and bacteria. During testing by independent labs, the black filters were able to remove more chlorine and viruses. Besides, they last for 3,000 gallons of water as opposed to just 1,200 gallons for the white ceramic filters. That’s why I recommend and use the black filters for my Berkey system, just make sure you select the right size from available Berkey sizes.

How to Clean Berkey Filters – Step by Step Instructions

1. Remove All Water from Your System

Your first step is to remove all of the water from the Berkey system so that you will be able to clean your filters. This is easy to do and consists merely of dumping all of the water from both the bottom and top chambers. This water can be poured down the sink to make the US home filter cleaning – Berkey filters process as easy as possible.

2. Remove Top Chamber

At this point, you will need to remove the top chamber from your Berkey system and set it aside. Make sure that it is on a clean surface so that you don’t have to worry about it getting bacteria or germs on it. By setting it on a solid surface, you can ensure it won’t fall.

Credit: BerkeyCleanWater

3. Remove Filters and Spigot

Now is the time to remove the drinking water spigot, filters, and plugs. These will come out of the lower chamber and need to be kept safe. Because you want to be thorough, I recommend washing this as well, so that you can be sure that your Berkey system is as clean as possible.

4. Soak All Parts

It’s important that you soak all of your washers, plugs, and the spigot in a bowl with warm water. You can opt to use soap or a little bleach to ensure that they get nice and clean.

Pro Tip: Using bleach instead of water will ensure that your parts are as clean as possible and reduce the risk of contamination.

5. Scrub Your Filters

One crucial step that you don’t want to forget when cleaning your Berkey filters is to scrub them thoroughly. I always allow the most time for this step when planning how to clean Berkey filters, as they are the dirtiest and need to be thoroughly cleaned before putting the stainless steel water filtration system back together.
Pro Tip: Keep the nipple end of the filter pointing up while you are scrubbing. While you won’t see a massive difference in the appearance of your filter when you are done, your sponge will likely turn a little black. You don’t want to let water enter the core of your filter. Make sure you stop it by placing your finger over the water exit hole.

6. Scrub the Chambers

It’s terribly important to make sure that your chambers are clean. I also like to clean my lid to make sure that everything is as clean as possible. Using warm, soapy water is the best option here. I scrub both the inside and the outside of my chambers with my pads, as this ensures that I haven’t missed any germs or contamination.

Pro Tip: While you may be tempted to use a harsher cleaner, don’t do it. I love soap because I don’t want any strange chemicals being introduced into my drinking water or damaging my perfect water purifier.

7. Carefully Reassemble Your Filter

Reassembly is relatively easy, and as long as you complete it correctly, you won’t have to deal with any leaks. Make sure that the spigot washer has been installed correctly to avoid any problems.

Pro Tip: You want to install the two washers on either side of the lower chambers wall. Additionally, ensure that you use the beveled washer on the outside of the chamber. The beveled side of this washer needs to be pointing toward the wall of the chamber.

Conclusion

See. That wasn’t that hard.
Now that you know how to clean berkey filters and the chambers you can do this task a handful of times a year. A film already developed on mine just after 3 months of use. So I plan on cleaning mine once every quarter. You can do what you want. But I would recommend cleaning these at least twice a year.

About Author

GDT’s advice, information, and recommended tools ensure your preparedness in emergency situations. We’re thinking ahead and preparing now

Leave A Reply